Roof Access Ladders Aurora IL – Ladder Latch – 450 East 22nd Street, Suite 150 – Call 630-512-1018
Roof Access Ladders Aurora IL
Some helpful information about fixed Roof Access Ladders Aurora IL:
Permanently connected to a structure, fixed ladders are usually equipped with handrails or rungs. The Occupational Health and Safety Administration (OSHA) mandates that the rungs and steps on this type of ladder must have slip-resistant coating to reduce the risk of slipping.
Other OSHA safety requirements and rules regarding ladders include:
-A minimum clearance width of 16 inches.
-Ladders must be only used for their designated purposes.
-The ladders must extend at least 42 inches above access levels.
-Rungs, cleats and steps must be ten to 14 inches apart along the ladder’s rails.
-Commercial Roof Access Ladders Aurora IL must remain free of any obstructions and clean at all times.
Fixed commercial ladders are utilized in a variety of industries for slip resistance, performing tasks and event to avoid corrosion. Some typical applications that often require the use of a fixed ladder include:
-Working in confined areas.
-Wind turbines.
-Construction sites.
-Industrial facilities.
Advantages of Fixed Roof Access Ladders Aurora IL
Mounted permanently on a structure, fixed ladders do not typically require transportation or assembly. They enable quick and convenient access for inspections and maintenance tasks. Plus, when installed in compliances with OSHA guidelines, they can help to improve your jobsite’s safety ratings.
Improve the Security of the Roof Access Ladders Aurora IL at Your Job Site with Ladder Latch! Order Now at 630-512-1018
Ladders are an everyday tool used in many industries. It’s important for employers to consider their options when purchasing new equipment for their operations. This will ultimately help protect the health and safety of all employees.
Every ladder type is specifically manufactured to safely support a specific weight limit. Before choosing a ladder, you’ll want to consider the weights that your job sites typically require. For instance, consider the weight of your equipment and the average weight of your employees. Accounting for those numbers can help you estimate maximum load capacities that are safe so you can find ladders that fulfill your requirements.
A Few Tips on Safe Ladder Usage
-Choose the right ladder type to match the task.
-Confirm the ladder height is sufficient. If it’s too short, it may result in overreaching or instability.
-Consider the material used to manufacture the ladder. The material ought to be nonconductive if you’ll be working in proximity to live wires to prevent the risks of electrocution which could cause loss of balance.
-Pay careful attention to the ladder’s duty rating, which is the maximum weight the ladder is designed to safely support. It means the ladder is able to handle the user’s body weight in addition to equipment. A ladder with a duty rating that is insufficient for a particular job can be at risk of structural failure.
-Perform an inspection for any signs of damage to the ladder. Check for any missing screws, bolts, rungs, cleats, loose components or any other defects. If you see any, immediately label the ladder with “out of order” or similar terms.
-Place the ladder in a secure location. It should be on a supportive, level surface without debris. If possible, put the ladder in an area with minimal traffic. Or, place safety barriers around the ladder to keep people or equipment from running into it.
-Always maintain 3 points of contact. Do not carry materials and tools that could lead to a loss of balance or stability. Do not step above the ladder’s 2nd highest step. (Or the 4th highest rung upon an extension ladder.)
Order Ladder Latch today for your Roof Access Ladders Aurora IL at 630-512-1018 or place your order online!